TCFND250-1 Clark's Fountain Nozzle and Drill Fixture 2"tube I
Clark's Fountain Nozzle and Drill Fixture 2"tube I.D.
Price: $ 130.00 / Each
John Sagaria and I designed the nozzle and drill fixture to solve a problem that has plagued the Clark's fountain builders in the past. It puts an end to the blown nozzle that sometimes happens due to high internal pressures. The nozzle support system was engineered to stop the problem of the clay nozzle being blown out of the case upon ignition. The kit consists of one machined aluminum drill fixture that is held in place by 4 bolts drilled through the case and fastened into the aluminum nozzle support. The nozzle support sits in direct contact against the rammed clay nozzle (see picture below).
To ensure correct hole locations the kit comes with a drill fixture machined from a solid piece of aluminum that fits over the end of the case and is held in place by two screws. Four guide holes in the fixture pilot your drill to correctly position the 4 holes that hold the support in place. Each kit comes with 1 aluminum nozzle support which is reusable for your next fountain and 1 drilling fixture. Also included are the 4 screws that hold the support nozzle in place (drill not included). John Sagaria has a video out showing how to use the product.
